HCR Compression Moulding

| June 13, 2017

This silicone rubber moulding method is better suited for smaller quantities and where a joint is required between two components.

Permalink

| June 13, 2017

This silicone rubber moulding method is better suited for smaller quantities and where a joint is required between two components.

Read more

压成品

| September 20, 2016

QSR具有对多样的有机硅材料挤压ID / OD管和复杂几何结构的能力,该材料可根据您的所需规格,切割成特定长度。

Read more

| September 20, 2016

QSR具有对多样的有机硅材料挤压ID / OD管和复杂几何结构的能力,该材料可根据您的所需规格,切割成特定长度。

Read more

定制容量生产

| September 20, 2016

无论数量多大,您都可以依赖QSR按时并预算范围内提供高品质、定制模压橡胶零件。

Read more

| September 20, 2016

无论数量多大,您都可以依赖QSR按时并预算范围内提供高品质、定制模压橡胶零件。

Read more

橡胶二次成型

| September 20, 2016

QSR在工程技术,尤其在双部件(2K)或橡胶二次成型项目中的持续投资,令其位于行业领先水平。

Read more

| September 20, 2016

QSR在工程技术,尤其在双部件(2K)或橡胶二次成型项目中的持续投资,令其位于行业领先水平。

Read more

液体注射成型

| September 20, 2016

QSR的最先进的液体注射成型(LIM)机器采用自动化运作,运行速度快于其他程序,并降低了定制部件的劳动力成本。

Read more

| September 20, 2016

QSR的最先进的液体注射成型(LIM)机器采用自动化运作,运行速度快于其他程序,并降低了定制部件的劳动力成本。

Read more

HCR传递成型

| September 19, 2016

QSR专注于传递成型,采用高稠度橡胶和低废技术,经济高效地生产微到中型产品。

Read more

| September 19, 2016

QSR专注于传递成型,采用高稠度橡胶和低废技术,经济高效地生产微到中型产品。

Read more

HCR Transfer Moulding

| April 25, 2016

Specializing in transfer moulding using high consistency rubber to produce micro to mid-sized components.

Read more

| April 25, 2016

Specializing in transfer moulding using high consistency rubber to produce micro to mid-sized components.

Read more

Bio-Pharmaceutical Assemblies

| April 25, 2016

Proven provider with more than 10 years of experience producing bio-pharmaceutical assemblies.

Read more

| April 25, 2016

Proven provider with more than 10 years of experience producing bio-pharmaceutical assemblies.

Read more

Extrusion

| April 25, 2016

Silicone Altimex has the capability to extrude ID/OD tubing and complex geometries in a wide range of silicone materials.

Read more

| April 25, 2016

Silicone Altimex has the capability to extrude ID/OD tubing and complex geometries in a wide range of silicone materials.

Read more

Liquid Injection Moulding

| April 25, 2016

State-of-the-art liquid injection moulding (LIM) machines are automated to run faster than other processes and reduce labor costs on custom parts.

Read more

| April 25, 2016

State-of-the-art liquid injection moulding (LIM) machines are automated to run faster than other processes and reduce labor costs on custom parts.

Read more